Open FPGA toolchain This is a detailed installation procedure for the Open FPGA toolchain into Ubuntu on my MAC M1 powered by UTM. FOSS Flows For FPGA - F4PGA documentation F4PGA ➚, which is a Workgroup under the CHIPS Alliance ➚, is an Open Source solution for Hardware Description Language…f4pga.readthedocs.io Followed the below URL, but the toolchain binaries are all for X86_64 of the conda package, and it seems there is no Aarch64 version. Orz…

Because of no official support on VirtualBox, I decided to use UTM for my M1 Mac. Preparation: Mac OSversion; % sw_vers ProductName: macOS ProductVersion: 13.3.1 ProductVersionExtra: (a) BuildVersion: 22E772610a Download ARM version Ubuntu iso image from the official site. Ubuntu for ARM | Download | Ubuntu Download Ubuntu Server for ARM with support for the very latest ARM-based server systems powered by certified 64-bit…ubuntu.com

How to install the MQTT+TLS Base Ubuntu is following; DISTRIB_ID=Ubuntu DISTRIB_RELEASE=22.04 DISTRIB_CODENAME=jammy DISTRIB_DESCRIPTION="Ubuntu 22.04.1 LTS" Install the following PKGs; $ sudo apt update $ sudo apt upgrade $ sudo apt install openssl $ sudo apt install openssh-server $ sudo apt install mosquitto $ sudo apt install mosquitto-clients Generate certification files by following the steps;

If your PC can execute the following “wmic” command on the PowerShell terminal then you DO NOT need to read this content. Just uncomment [[inputs.temperature]] on your Telegraf configuration file, then it is fine. > wmic /namespace:\\root\wmi PATH MSAcpi_ThermalZoneTemperature How to install the Telegraf > wget https://dl.influxdata.com/telegraf/releases/telegraf-1.XX.X_windows_amd64.zip -UseBasicParsing -OutFile telegraf-_windows_amd64.zip > Expand-Archive .\telegraf-_windows_amd64.zip -DestinationPath 'C:\Program Files\InfluxData\telegraf\' >…

This is a short note about how to build OpenFOAM from the source by using the Docker image on my M1 MAC (Monterey on Macbook Air M1–2020) environment. Preparation Docker has been supported Apple silicon chip already, then install Docker by the following link; https://docs.docker.com/desktop/mac/apple-silicon/ Download Dockerfiles and build the image To build a proper Dockerfile which…

This is a short note about how to operate OpenFOAM by using the Docker image on my M1 MAC (Monterey on Macbook Air M1–2020) environment. Preparation Docker has been supported Apple silicon chip already, then install Docker by the following link; https://docs.docker.com/desktop/mac/apple-silicon/ Following instructions for installing OpenFOAM Follow the install instruction for OpenFOAM with Docker by…

This is the Hardware/Software design (Vivado/Petalinux) part of the Zybo Z7–20 audio system project. I would show how to configure both HW/SW for Master/Slave I2S operation with the ADI’s HDL code which I described in previous memorandums. The tool environments and preparation Before starting this project, I have confirmed a LINUX boot on the Zybo…

This is the Software Designing (Petalinux) part of the Zybo Z7–20 audio system project and I have edited the device driver and DTS file to support the I2S slave mode function. The tool environments and preparation Before starting this project, I have confirmed a LINUX boot on the Zybo Z7–20 Rev. B board with following…

This is the Hardware Designing (Vivado) part of the Zybo Z7–20 audio system project and I have edited the ADI’s HDL code for I2S IP to support the I2S slave mode function. Appreciated who wrote the simple original HDL code. The tool environments and preparation Before starting this project, I have confirmed a LINUX boot…